A broken air conditioner is not something you want to deal with. The AC Repair Guide for Homeowners delivers the complete solution related to any problem. When it’s hot outside, the last thing you need is a noisy, inefficient A/C unit that isn’t cooling the house down. Luckily, there are some things homeowners can do for themselves that will help get their A/C back up and running in no time!
The first thing you need to do is turn off the electricity. Unfortunately, many homeowners tend to forget this step. Before messing with anything inside your A/C unit, shut off the circuit breaker for safety purposes.
If you have a digital meter that tells which breaker feeds into each outlet in your home, you will know exactly where the circuit breaker for your A/C is. If not, then you can use a multi-meter to figure it out. Once you’ve found the correct breaker, flip it off and wait about 30 seconds before turning them back on again. This gives any residual electricity in your system time to dissipate.
If you don’t know how to handle your cooling system, experts highly recommend contacting an A/C professional for A/C repair in Irving, TX.
Once you’ve turned off the power, it’s time to clean that dirty old A/C. Cleaning a clogged air conditioner coil will help improve airflow and ensure that your system isn’t running harder than needed. The best way to do this is by using an extendable brush attached to a garden hose to spray away any debris clogging your A/C unit.
Just remember, don’t let the water run for too long, or it will cause damage! Also, be aware of where you are spraying so as not to ruin anything with the power off (you wouldn’t want anyone else who lives there getting hurt by mistake).
Now that your A/C unit is clean, it’s time to check the refrigerant. First, you need to ensure to have a working thermometer. You can use an oven thermometer if you don’t want to buy one specifically for this job).
Turn on all your electrical appliances like fans and lights to get the refrigerant levels up and running. Next, check the pressures with a gauge. The AC Repair Guide for Homeowners in detail. The pressure should be around 50 psi. Lastly, add a refrigerant if necessary. Do you know how to do this step? You should call the right experts to handle A/C repair in Irving, TX if you don’t.
After you’ve checked your refrigerant levels, turn the circuit breaker for your A/C unit back on. This is when you want to make sure that everything looks good and there are no leaks to avoid any problems later down the road. If all goes well, then give it a try inside! Still, it’s always a better decision to contact an expert for A/C repair in Irving, TX.
Even though you’ve cleaned your air conditioner and added some refrigerant, chances are there has been a lot of wear on the interior components. This is why you should consider getting your A/C unit professionally inspected at least once per year to make sure everything is working correctly. If not done correctly, adding too much refrigerant can make your A/C unit less efficient instead of more.
If you are looking for the most trusted A/C repair in Irving, TX, look no further than Spencer Air Conditioning and Heating. The company has been serving homeowners throughout Texas for many years, and they specialize in HVAC services, including installation, inspection & maintenance, and repairs of all types!
If your air conditioner isn’t cooling or working correctly, then call the company today at 972-446-2665 to get your system working again.